Replace the Honda CR-V Coolant Recovery Tank
This article is about how to Replace the Honda CR-V Coolant Recovery Tank. The cooling system of the Honda CR-V is tremendously important in that it regulates the engine temperature. If the system malfunctions, the car can overheat or eventually fail. A necessary component of that system is the coolant recovery tank. If this tank begins to leak or break down, instant replacement of the coolant recovery tank is imperative.
Replace the Honda CR-V Coolant Recovery Tank Instructions
1. Place a bucket beneath the radiator and immediately beneath the drain plug. On the Honda CR-V, the plug is on the bottom middle of the radiator. In addition, the bucket should have a capacity of no less than 2 gallons to prevent overflow.
2. Open the radiator plug and let the coolant drain into the bucket. Make sure the radiator is cool to the touch before opening the drain. Then pour the coolant right into a sealable container for proper disposal.
3. Remove the nuts, which secure the coolant recovery tank to the Honda CR-V. Use a socket wrench to remove the nuts. You may additionally want a socket extension, as some models have nuts that are tough to access. You’ll want to put the nuts in a safe place so you will not lose them.
4. Take a pair of hose clamp pliers and take away the hose clamps. Watch out, as a result of the hoses can have leftover coolant in them. Once eliminated, cover the hose openings to keep them free of dust and debris.
5. Pull the prevailing coolant recovery tank out and exchange it with the new tank. You’ll want to align the tank connections with the bolts on the CR-V. Then, reattach the nuts back to the bolts and tighten them with the socket wrench. Confirm the tank is securely in place before continuing.
6. Close the drain plug and refill the radiator with fresh coolant. Subsequent, switch on the engine with the heater set to high. Let it run for 15 or 20 minutes.
7. Change off the engine and examine for leaks. If none exist, close the hood and clear up your mess.